USB LED Photocatalyst Mosquito Killer Lamp No Radiation Inhalant Light Trap

USB LED Photocatalyst Mosquito Killer Lamp NO Radiation Inhalant Light Trap Catcher
Working principle:
The LED light generates light and can attract the surrounding mosquitoes to the light source. When the mosquito approaches the light source, the airflow generated by the fan quickly draws them into the collection net.

Mode:
Normal mode: press the switch once;
Efficient mode: press the switch twice;
Sleep mode: press the switch three times;

Specifications:
Input voltage: DC 5V-1A
Material: ABS
Fan: 1800 rpm
Rated power: 3W-5W
Use area: 10-30 square meters
Product size: 190*150*110mm/7.48*5.91*4.33\"
Packing size: 195*185*140mm/7.68*7.28*5.51\"
Net weight: 610g
Gross weight: 765g

Instructions:
1. Using DC 5V, please plug in the USB power directly and tap the switch on the top. (tap once: strong wind mode; tap twice: mid-level wind; tap three times: silent sleep mode)
2. If using intelligent light control mode to control (automatically start/shutdown according to the light intensity), please open the black silicone sleeve on the top of the light control probe to expose the light probe. At this time, the light control probe will turn it on/off according to the external light.
3. Place the mosquito killer lamp indoors at an altitude of about one meter from the ground to avoid interference from other light sources.
4. If the power is not connected, separate the upper and lower body and take out the mosquito trap collection net cover.
5. After the mosquito residue is treated, align and restore the upper and lower body, and it is ready to use again. 

Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 
2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor.

Package Content:

1 x Mosquito Killer Lamp
1 x USB Cable
1 x Manual