FeiyuTech AK2000 3-Axis Camera Stabilizer Handhel Gimbal for Sony Canon 5D Panasonic Camera Camcorder
Adapter camera: for Canon: 5D Mark III, 5D Mark IV, 6D, 80D and other similar body (not suitable for high body like Canon 1DX)
For SONY: a7 series, a9 series
Other mainstream video machines: such as for Panasonic, for Nikon, such as GH5/GH5S, for Nikon D850, etc.
Load-bearing range: 250g/0.55lb–2800g/6.17lb including accessories such as lens (center balance)
Pitch angle: 360° (infinite position)
Roll angle action angle: 360° (infinite position)
Heading angle action angle: 360° (infinite position)
Controllable range of rotation:
Pitch controllable angle: 360° infinity
Roll controllable angle: ±30° (horizontal adjustment key control)
360° infinity (when fully following mode, horizontal hand grip, use the joystick to control roll 360° rotation)
Heading controllable angle: 360° infinity
Camera fixing method before booting:
Both the left and right sides of the motor can be used. Depending on the camera's size and weight, use the 1/4-inch screw to select the corresponding camera mounting hole to lock the camera.
The vertical and horizontal directions of the pitch axis are adjusted in turn, and the center of gravity of the roll axis and the heading axis are balanced.
Leveling criteria: The camera can be stopped at any angle without the need for hand adjustment (the pitch axis must be adjusted to equilibrium)
Front of the mounting plate: 1/4" tapped hole for mounting followers or other accessories
Fixed plate bottom: USB interface, can be connected to the follower
Rear of the fixed board: 3.5mm interface, can be connected to the camera shutter
Heading motor: 1/4" tapped hole for fitting accessories
Bottom of handle: 1/4" tapped hole for tripod or other accessories
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x Standard Accessories Micro USB Cable
1 x Release Cable for Sony
1 x Shutter Release (N3) for Canon
1 x Release Cable (L1) for Panasonic
4 x 18650 Power Battery
1 x Metal Tripod
1 x Four Charge Charger
1 x Fixed Hand Screw (short)
1 x EPP Packing Box