EDUP EP-AC1625 WiFi Repeater Range Extender 300Mbps 2.4GHz 802.11n Wireless Router Signal Amplifier Booster
– Low noise receiving gain
– High gain, high value, high performance
– 8000mW maximum output power of the amplifier
– Plug and play, easy to install, no drivers required
– Ideal for adding 2400-2500 MHz frequency devices
– Extend the effective range and coverage of Wi-Fi network
– Simply place the repeater between the standard antenna on your wireless router or wireless access point to see your range
– Amplified wireless signals can even penetrate complex environments with many walls and obstacles
– Suitable for 2.4 GHz wireless LAN support 802.11b 802.11g 802.11n (2.4GHz mode)
Power adapter type: US/ EU plug
Input: AC 100-240V 0.3A 50/ 60Hz
Output: DC 12V 1.5A
Receive gain: 10-12dBi
Transmit gain: 16-18dBi
Input power range: 3-20dBm
Output power: 8W
Wi-Fi supported frequency: 2.4G
2.4G Wi-Fi transmission rate: 300 Mbps
Operating temperature: -40 ~ 70℃
Operating humidity: up to 95% RH
Connection cable: 20cm/7.87"
Wired transmission rate: 10/100/1000 Mbps
Standard protocol: Wi-Fi 802.11b, Wi-Fi 802.11n, Wi-Fi 802.11g
Wi-Fi transmission standard: 802.11n
Product size: 225mm*155mm*66mm/8.86*6.10*2.60"
Product weight: 500g
When in use, your device must be a detachable SMA antenna connector, for example, an SMA detachable antenna router.
Verify that the device's output power ranges from 3dBm to 20dBm so that the Wi-Fi signal amplifier can function properly.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 x WiFi Repeater
1 x Power Adapter