Function: automatically off during the day, automatically on at night; when human approaches, it lights on, when human leaves, it goes out
Output power: 12W
Rated voltage: 110V
Color temperature: 3500K warm white
Working current: 108mA
Standby time: 50,000H
Number of beads: 26pcs
Light source type: 2835 SMD
Control method: light control induction
Lamp base: E27
Product size: 70*135 mm/2.76*5.31\"
Net weight: 52g
Outer box size: 7.2*7.2*14.8 cm/2.83*2.83*5.83\"
Gross weight: 76.5g
1. Infrared sensor: Built-in motion sensor( on the top of T-shaped bulb), automatically turns on when the sensor is triggered, and goes off after 20-30 seconds.
2. Working environment: Built-in brightness sensor, infrared sensor off during the day to save energy.
3. Working voltage: 110V
4. Working temperature: -10~ 35℃
1. Do not install 2 lamps in the same fixture or too close (less than 3 meters), otherwise the function of the bulb sensor will affect each other.
2. For indoor/outdoor use, do not place the sensor in a closed position. The infrared sensor must be exposed to the outside. Otherwise, the infrared sensor will not work properly.
3. Make sure the infrared sensor is facing the sensing area for a better sensing range.
4. The bulb will stay on if there was continuous movement in the detecting area (automobile, hot air, animal, or human).
5. In order to achieve better sensing effect, the recommended installation height should be 3-5 meters.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor.
1 X led Light Bulb