1set Metal Double Head Sheet Cutting Nibbler Drill Attachment Saw Cutter
1set Metal Double Head Sheet Cutting Nibbler Saw Cutter Tool Drill Attachment Cut Tools Accessories
Double cutting head and 360 degree adjustable.
Excellent cutting effect without any burrs and edges.
Ergonomic design handle for comfort.
Durable, efficient and safe.
Compact size, easy to operate and labor-saving.
Size: Upper diameter: 7mm/0.28" Both sides diameter: 10.5cm/4.13" Length: 13cm/5.12"
Minimum cutting radius: 12mm/0.47"
Maximum cutting capacities:
Steel plate 1.8mm/0.07"
Stainless steel 1.2mm/0.05"
Copper/aluminium plate 2mm/0.08"
Operation Requirements and Replacement Parts:
1. Knife blade diligent refueling, especially cutting aluminum is particularly important.
2. First start the electric drill, then cut it. At the end, first exit the electric drill and then turn it off.
3. During cutting, the cutting of the Cutter Holder must be perpendicular to the cut workpiece to prevent the head from being broken.
4. Cutter Holder replacement: Open the protective cover, remove the locknut, loosen the set screw, remove the arbor with pliers, reinstall the arbor, and tighten the screws.
5. Tool Reset replacement: Screw out the compression cap counterclockwise, put on a new Tool Reset.
Sheet Metal Nibbler Instructions:
When equipped with a thin plate hole opener, first insert the front end of the drill and the cutter into the hole of the hole cutter, connect the cutter to the drill and lock it firmly, and then tighten the three sticks and the head screws of the rack , So as to prevent the hole of the hole opener from slipping. Insert the rule bar left-to-right into the square hole of the shelf with the left-to-right positioning pin upward.Finally adjust and tighten the tight-top screw according to the size of the arc to be cut,ensure the accuracy of cutting round hole.
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
1 X Machine Tool
1 X Tool Reset
1 X Cutter Holder
1 X Hex Key
1 X Plastic Handle